We have used our 40 years experience to design and develop a Single Span range which is best suited to the needs of the commercial growers.

Our CLASSIC Single Span polytunnels are COMMERCIAL polytunnels, they are NOT domestic polytunnels pretending to be commercial polytunnels. They are made and covered with commercial grade materials. They are made to withstand the trials and tribulations of commercial use.

Our CLASSIC Commercial Single Span structures are available in the following widths;

    •    18ft (5.49 metres)
    •    21ft (6.40 metres)
    •    24ft (7.31 metres)
    •    27ft (8.23 metres)
    •    30ft (9.14 metres)

We offer the following specification on all of our CLASSIC Commercial Single Span Polytunnels as standard;

Steel Diameter: 50.8 mm
Steel Specification: Z35 high tensile galvanised.
2 Piece Hoops - We supply all of our hoops as a 2 piece hoop, which are stronger and easier to construct - We use these as standard across our range for domestic and commercial structures.
Straight Sides: Approx. 1m - excellecnt accessibility and increases floor space.
Hot dipped foundation tubes to ensure corrosion resistance.
 1¼" nominal bore, which allows the hoops to be set and adjusted for tensioning the cover.
Zinc plated fixing brackets.
End Frames: Timber (3"x3" Tanalised timber) or Aluminium.
All necessary brackets, bolts and fixings.

24ft, 27ft & 30ft Widths

Steel Diameter: 60.3 mm
Steel Specification: Z35 high tensile galvanised.
2 Piece Hoops - We supply all of our hoops as a 2 piece hoop, which are stronger and easier to construct - We use these as standard across our range for domestic and commercial structures.
Straight Sides: Approx. 1m - excellecnt accessibility and increases floor space.
Hot dipped foundation tubes to ensure corrosion resistance.
 1½" nominal bore, which allows the hoops to be set and adjusted for tensioning the cover.
Zinc plated fixing brackets.
End Frames: Timber (3"x3" Tanalised timber) or Aluminium.
All necessary brackets, bolts and fixings.

Commercial Polytunnels may require planning permission, so it is always best to enquiry at your local planning office before purchasing a commercial polytunnel. Our IN-HOUSE team of structural design engineers can help with the planning application process by submitting planning application drawings for your site and include structure elevations. Prior to an order, this service will occur a charge which will be credited when a official order is received.